Pressure Sensitive Hot Melt Adhesive For Infusion Paste

 

Application:

1. Safe operation

2. Good wettability

3. High shear strength

 

Operating Temperature:

110 C ~ 150 C, depending on the machine, substrate, environment, etc.other conditions.

 

Coating Method:

Is suitable for standard hot melt fiber spraying, multi-line,slit scraping and other coating methods.

 

Recommended Ambient Temperature:

≥ 5°Cstoragemust be stored in a dry and cool place below 40°C for 24 months.

 

Precautions:

·Do not mix with other adhesives; The use temperature cannot exceed 160°C

·The hot melt adhesive groove must be tightly covered to prevent debris from falling into and affecting the performance of the adhesive.

·Because the hot melt adhesive must be heated when used, personal protective equipment must be worn.

·We recommend that you use the advanced-first-use cycle.

 

 

PV:0
Homepage of the website    adhesive    medical supplies industry    Pressure Sensitive Hot Melt Adhesive For Infusion Paste